Xerox WorkCentre M24-2780 - Manual (Page 321)

3–31
U S E R G U I D E (S C A N )
Scanning in Batches
This section describes how to scan multiple originals as one scan
job if you have more originals to be scanned than can fit into the
DADF.
1
Begin scanning your first original, then select Next Original.
NOTE:
• When using the DADF, wait until the machine has
completed scanning the first batch of originals before
loading the next batch.
• If no action is carried out after the above screen has been
displayed, the machine will assume that there are no more
originals to be scanned and end the job.
2
Load the next original and then press Start.
3
Select Last Original after all originals have been scanned.