Xerox WorkCentre M123-M128-6336 - Manual (Page 31)

System Controls
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide 31
Faults
This screen allows you to output a report of recent errors, the date and time of the
errors, the error codes, and the status of each error. The status is either active or
cleared.
1. Press the <Machine Status>
button on the control panel.
2. Select the [Faults] tab.
3. Select [Error History Report] and
press the <Start> button on the
control panel to output the
report.
System Controls
The following diagram shows the names and functions of the buttons on the control
panel.
Button Function
1 <Log In/Out> Displays the log-in screen to enter the [System Administrator
Menu] screen, or when the Authentication feature is enabled. Also,
if you press this button to display the log-in screen when you are
already logged in, you will be logged out of the machine.
2 <Help> This button is non-functional on this machine.
3 <Language> Changes the languages displayed on the touch screen.
NOTE: Certain characters may be garbled when you change
languages.
4 <Power Saver>
(green light) Indicates whether the machine is in power saver mode. Also
cancels Low Power Mode or Sleep Mode.
1 3
5
8
9 10 11
12
13
6
7
4 2