Xerox WorkCentre M123-M128-6336 - Manual (Page 32)

2 Product Overview
32 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
Button names and icons used on the control panel may differ depending on the country
of purchase.
System Settings
During manufacture this machine is pre-programmed with default settings which can
be customized using the System Settings. The System Settings can be accessed via
the <Log In/Out> button. The following set up categories are available.
• Common Settings
• Copy Settings
• Network Mode Settings
• Print Mode Settings
• Scan Mode Settings
• Fax Mode Settings
• E-mail/iFax Settings
• Mailbox Settings
• Application Communication Settings
5 <Clear All> Resets to the default settings and displays the first screen for the
current pathway.
6 <Interrupt> Temporarily interrupts a job for programming a priority job.
7 <Stop> Suspends or cancels a job depending on the job type. When
multiple jobs are being processed, all the jobs will be suspended or
cancelled. Selecting [Stop] on the [Job Status] screen stops only
the selected job.
8 <Start> Starts or resumes a job.
9 <Speed Dial> Enters speed dial codes.
10 <C> Deletes a numeric value or the last digit entered, and replaces the
current value with a default value. Also cancels suspended jobs.
11 <Dial Pause> Inserts a pause while dialing a fax number.
12 <*(asterisk)> Indicates the special character used in a fax number and
designates a group code. Also allows you to specify an F Code or a
password.
13 <All Services> Displays the [All Services] screen for selection of all the available
services on the machine.
Button Function