Olympus FE-240 - Manual (Page 25)

Me
nu operati
o
ns
EN
25
If the recorded digital image has any blur incurred by camera shake, the image
will be stabilized and saved as a new one.
• Select a picture with XY, and select [YES] with ON
to stabilize the picture.
• When corrected or stabilized pictures are displayed,
[YES] cannot be selected.
• Some blurs may be left on some pictures.
• Movies, pictures taken by other cameras, or edited
pictures cannot be fixed.
Protected pictures cannot be erased. Cancel protection before erasing protected
pictures. Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
• When erasing pictures in the internal memory, do not insert the card into the
camera.
• When erasing pictures from the card, insert a card into the camera in advance.
• Use the arrow pad to select the picture, and press 
to mark R on your selection.
• To cancel the selection, press
 again.
• When the selection is completed, press S.
• Select [YES], and press .
• Select [YES], and press .
This function allows you to save printing data (the number of prints and the date
and time information) with the pictures stored on the card.
g “Print settings (DPOF)” (P. 35)
DIS EDIT Stabilizing the recorded digital image
YES /NO
ERASE Erasing selected pictures/Erasing all pictures
SEL. IMAGE
.............................................Erasing by selecting the single-frame
ALL ERASE ..... Erasing all the pictures in the internal memory or on the card
PRINT ORDER Making print reservations (DPOF)
6
MENU BACK
D I S E D I T
YES
NO
OK SET
7
OK MENU GO BACK
[IN] S E L . I M A G E
8