Install the olympus master software, Gp. 39, Usi n g olympus master – Olympus FE-240 User Manual

Page 39

Advertising
background image

Usi
n

g OLYMPUS

Master

EN

39

Before installing the OLYMPUS Master software, please confirm that your computer is
compatible with the following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the back
cover of this manual.

Operating environment
Windows

OS

Windows 2000 Professional/XP Home Edition/XP Professional/Vista

CPU

Pentium III 500 MHz or later

RAM

256 MB or more

Hard disk capacity 500 MB or more
Monitor

1,024 × 768 pixels or more
65,536 colors or more (16.77 million colors or more recommended)

Other

USB port or IEEE 1394 port
Internet Explorer 6 or later
QuickTime 7 or later recommended
DirectX 9 or later recommended

Note

Windows 98/98SE/Me are not supported.
• Use a computer with a pre-installed operating system. Operations are not guaranteed on

home-built computers or computers with an updated operating system.

• Operations are not guaranteed when using an added USB port or IEEE 1394 port.
• To install the software, you must log on as a user with administrators’ privileges.

Macintosh

OS

Mac OS X v10.3 or later

CPU

Power PC G3 500 MHz or later
Intel Core Solo/Duo 1.5 GHz or later

RAM

256 MB or more

Hard disk capacity 500 MB or more
Monitor

1,024 × 768 pixels or more
32,000 colors or more (16.77 million colors or more recommended)

Other

USB port or IEEE 1394 port (FireWire)
Safari 1.0 or later (1.3 or later recommended)
QuickTime 6 or later

Note

Mac versions earlier than OS X 10.3 are not supported.
• Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.
• To install the software, you must log on as a user with administrators’ privileges.
• Be sure to remove the media (drag & drop onto the trash icon) before performing the

following operations. Failure to do so could result in unstable computer operation and the
need to reboot.

• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery/card compartment cover

Install the OLYMPUS Master software

Advertising
This manual is related to the following products: