Olympus FE-240 - Manual (Page 53)

Getting to know
your came
ra
better
EN
53
When you get an error message on the camera...
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with
the card. This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited. The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
>
MEMORY FULL
The internal memory
has no available
memory and cannot
store any new data. Insert a card or erase unwanted
data. Before erasing, backup the
data of important pictures using the
card. or download such pictures to a
computer.
q
CARD FULL
The card has no
available memory and
cannot store any new
data. Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
L
NO PICTURE
There are no pictures in
the internal memory or
on the card. The internal memory or the card
contains no pictures.
Record pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera. Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
r
THE IMAGE
CANNOT BE
EDITED
If pictures taken by other
cameras are selected,
they cannot be edited. Use image processing software to
edit the pictures.
CARD-COVER
OPEN
The battery/card
compartment cover is
open. Close the battery/card compartment
cover.
g
BATTERY
EMPTY
The battery is empty. Charge the battery.
This card cannot be
used in this camera. Or,
the card is not formatted. Format the card or replace.
• Select [POWER OFF] and press
. Insert a new card.
• Select [FORMAT] [YES] and
press . All data on the card is
erased.
There is an error in the
internal memory. Select [MEMORY FORMAT]
[YES] and press . All data in
the internal memory is erased.
OK
C A R D S E T U P
POWER OFF
FORMAT
SET
OK
M E M O R Y S E T U P
POWER OFF
MEMORY FORMAT
SET