Toshiba LX830-C - Manual (Page 36)

3. Close the battery cover.
Pairing the keyboard/mouse
The wireless keyboard/mouse can be detected by your computer
automatically. However, there’s also some unexpected failure. In that case,
to normally use them, you may need to pair the wireless keyboard/mouse
by the following steps:
1.
Open the wireless receiver cover on your computer.
2. Press the Connect button of the dongle using a slender object such as
a tweezers.
Figure 2-7 Press the Connect button of the dongle
2
1
1. Connect button 2. Tweezers
3. Slide the Power switch on the back of the keyboard/mouse to the ON
position.
4. Press the Connect button of the keyboard/mouse. Please refer to the
Wireless Keyboard and Wireless Mouse section in Chapter 2, Grand
Tour for the location of the connect button.
The connection will be established.
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
Monitoring of power condition
section for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
Press and hold the computer's power button for two or three seconds.
User's Manual 2-7