Internal hardware components, Internal hardware components -15, Installing and replacing the battery – Toshiba LX830-C User Manual

Page 56

Advertising
background image

Installing and replacing the battery

1.

Open the battery cover on the back side of the remote controller.

2.

Slide the battery out of battery case.

Figure 3-12 Installing/Replacing the battery

RC6

ir

Made in China

MCE IR Remote Control

Model: G83C000BF116

1x 3V CR2032 Lithium battery

3.

Insert the new battery in place. Be sure to place the battery with
correct polarities. Push it forward to fit into the battery case.

4.

Close the battery cover securely.

Internal Hardware Components

This section describes the internal hardware components of your computer.
The actual specifications may vary depending on the model you
purchased.

CPU

The processor type varies depending on model.
To check which type of processor is included in
your model, open the TOSHIBA PC Diagnostic
Tool Utility by clicking Desktop -> Desktop
Assist (in taskbar) -> Support & Recovery ->
PC Diagnostic Tool
.

Legal Footnote (CPU)
For more information regarding CPU, please refer to the

Legal Footnotes

section.

Hard Disk Drive or
Solid State Drive

The size of the hard disk drive varies depending
on the model.
To check which type of HDD/SSD is included in
your model, open the TOSHIBA PC Diagnostic
Tool Utility by clicking Desktop -> Desktop
Assist (in taskbar) -> Support & Recovery ->
PC Diagnostic Tool
.
Please note that part of the hard disk's overall
capacity is reserved as administration space.

User's Manual

3-15

Advertising
This manual is related to the following products: