Intel rapid start technology – Toshiba Portege Z930-K User Manual

Page 37

Advertising
background image

If you want to enable this feature, under the conditions mentioned above,
select the Display Power Saving Technology check box.

Intel Rapid Start Technology

Some computers in this series support Intel

®

Rapid Start Technology which

enables the computer to change to Hibernation Mode from Sleep Mode
after a specified period of time.

With the Intel

®

Rapid Start Technology, the Windows can rapidly resume

from Hibernation Mode and battery life will be longer than when in Sleep
Mode.

Intel

®

Rapid Start Technology is enabled at factory default. The computer

will switch to Hibernation Mode after two hours of Sleep Mode.
You can use BIOS Setup to enable/disable the function and change the
specified time setting from Sleep Mode to Hibernation Mode.
1.

Press and hold the F2 key, and then turn on the computer - the BIOS
setup utility will load.

2.

Select Advanced.

3.

Enable/Disable Intel(R) Rapid Start Technology function.

4.

You can select the period of time from Sleep Mode to Hibernation
Mode using Rapid Start Entry after. If the Immediately option is
selected, the computer will switch to Hibernation Mode immediately
after your computer goes into the Sleep Mode.

When Intel

®

Rapid Start Technology is enabled, switching from Sleep

Mode to Hibernation Mode consumes power. When you carry your
computer aboard on an aircraft or in places where electronic devices
are regulated or controlled, always power off your computer.

When Intel

®

Rapid Start Technology is enabled, Wake-up on LAN,

Wake-up on USB or Wake-up from Sleep Mode automatically
functions are not available when the computer has been switched from
Sleep Mode to Hibernation Mode.
The Windows cannot be restored normally if the battery is exhausted
when the computer is moving from Sleep Mode to Hibernation Mode.

The partition allocation on the Solid State Drive for the Intel

®

Rapid

Start Technology cannot be deleted even if Intel

®

Rapid Start

Technology is disabled.

Intel

®

Rapid Start Technology can be used only for Windows 7.

Intel

®

Rapid Start Technology cannot be used in models that do not

equipped with a Solid State Drive.
The Windows restore time from Hibernation Mode depends on the
amount of system memory used in the computer.

PORTÉGÉ Z930/Satellite Z930 Series

User's Manual

2-13

Advertising
This manual is related to the following products: