System indicators, System indicators -2, Dc in/battery indicator – Toshiba Satellite Pro C650D User Manual

Page 104

Advertising
background image

6-2

User’s Manual

Satellite C650/C650D, Satellite Pro C650/C650D

System Indicators

The DC IN/Battery and Power indicators on the system indicator panel
alert you to the computer’s operating capability and battery charge status.

DC IN/Battery Indicator

Check the DC IN/Battery indicator to determine the status of the battery
pack- the following indicator conditions should be noted:

Power on

Power off
(no operation)

AC adaptor not
connected

Battery charge is
above low battery
trigger point

• Operates

DC IN/Battery LED:

amber

Battery charge is
below low battery
trigger point

• Operates

DC IN/Battery LED:

blinking amber

Battery charge is
exhausted

Computer goes into
hibernation or shuts down
(depending on the
TOSHIBA power
Management Utility Setting)

No battery
installed

• No operation

DC IN/Battery LED:

off

Blinking amber

Indicates battery charge is below low battery
trigger point

Amber

Indicates the AC adaptor is connected and
charging the battery.

Green

Indicates the AC adaptor is connected or the
battery is fully charged.

No light

Under any other conditions, the indicator does
not light.

If the battery becomes too hot while it is being charged, the charge will
stop and the DC IN/Battery indicator will go out. When the battery’s
temperature falls to a normal range, charge will resume. This event occurs
regardless of whether the power to the computer is on or off.

Advertising
This manual is related to the following products: