Neff G8320X0 - Manual (Page 25)

en
25
Controls
Fig. 2
Switching on
the appliance
Fig. 2
1. Switch on the appliance with the
On/Off button 5.
A warning signal sounds, the
temperature display 4 and the “alarm”
button 1 flash.
2. Press the alarm button 1.
The warning signal is switched off, the
appliance starts to cool. The alarm
button is lit and the temperature
display flashes until the appliance has
reached the set temperature.
We recommend a factory setting
of -18 °C in the freezer compartment.
Operating tips
■ After the appliance has been switched
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
■
The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting the
temperature
Freezer compartment
The temperature can be set from
-16 °C to -24 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
1 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
2 “super” button
Switches super freezing on and
off.
Illuminates when super freezing is
on.
3 Temperature selection button
The required temperature is set
with this button.
4 Temperature display
Indicates the set temperature of
the freezer compartment.
5 On/Off button
Serves to switch the appliance on
and off.