Room temperature switch, Ventilation, Installation location – Neff K4336X8 User Manual

Page 22: 3 cm to electric or gas cookers, 30 cm to an oil or coal-fired cooker, Undercounter, Connecting the appliance, Installation location connecting the appliance, En 22

Advertising
background image

en

22

Note
The appliance is fully functional within

the room temperature limits of the

indicated climatic class. If an appliance

of climatic class SN is operated at colder

room temperatures, the appliance will

not be damaged up to a temperature of

+5 °C.
Room temperature switch

If the room temperature drops below

+16 °C, the freezer compartment of

appliances belonging to climate

class SN may become too warm. In an

extreme case the frozen food may thaw.

To prevent this from happening, switch

on the room temperature switch. As a

result, the refrigeration unit operates

more frequently. The appliance can now

be operated at a room temperature of

+10 °C to +16 °C.
To switch on, press the room

temperature switch, Fig. "/B. Red mark

becomes visible. The light inside the

appliance is lit at a reduced luminosity.
To save energy, switch off the room

temperature switch as soon as the room

temperature exceeds +16 °C.

Ventilation

Fig. !/6
The refrigeration unit is ventilated only via

the ventilation grille in the base. Never

cover the ventilation grille or place

anything in front of it. Otherwise the

refrigeration unit must work harder,

increasing the power consumption.

Installation location

Install the appliance in a dry, well

ventilated room. The installation location

should neither be exposed to direct

sunlight nor near a heat source, e. g. a

cooker, radiator, etc. If installation next

to a heat source is unavoidable, use a

suitable insulating plate or observe the

following minimum distances to a heat

source:

3 cm to electric or gas cookers.

30 cm to an oil or coal-fired cooker.

Undercounter

An attachment under certain worktops,

e.g. stone, glass or stainless steel, is

frequently not possible. You can order

accessories from customer service for

installation on the side walls.

Connecting the

appliance

After installing the appliance, wait at least

1 hour until the appliance is switched on.

During transportation the oil in the

compressor may have flowed into the

refrigeration system.
Before switching on the appliance for the

first time, clean the interior of the

appliance (see chapter “Cleaning the

appliance”).

Advertising
This manual is related to the following products: