Philips HAIRCLIPPER Series 1000 Cortapelos - Manual (Page 9)

the comb attachment does not change the selected hair length
setting.
- Write down the hair length settings used to create a certain hairstyle
as a reminder for future clipping sessions.
Clipping without comb attachment
You can use the clipper without comb attachment to contour the
neckline and the area around the ears.
- To remove the comb attachment, pull it off the appliance (Fig. 5).
Never pull at the flexible top of the comb attachment. Always pull at the
bottom part.
- The comb attachment keeps the cutting unit at a certain distance
from your head. This means that, if you use the clipper without the
comb attachment, your hair will be cut off very close to the skin.
Using the precision trimmer
You can use the precision trimmer for precise contouring and defining.
1 Push the middle part of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance (Fig. 6).
Be careful that the cutting unit does not fall to the floor.
2 Place the lug of the precision trimmer into the slot and push the
unit back onto the appliance (‘click’) (Fig. 7).
Corded clipping
When the rechargeable battery is empty, you can also run the appliance
from the mains.
Do not run the appliance from the mains when the battery is fully
charged.
To use the hair clipper connected to the mains:
1 Switch off the hair clipper and connect it to the mains.
2 Wait a few seconds and then switch on the appliance.
English 9