Setting up polled transmission, Setting up polled transmission -21 – Brother MFC-8440 B User Manual
Page 116
6 - 21 SETUP SEND
Setting up Polled Transmission
Polled Transmission is when you set up your MFC to wait with a
paper original so another fax machine can call and retrieve it.
1
If it is not illuminated in green, press
(
Fax
). Place the
original that is going to be retrieved face up in the ADF, or face
down on the scanner glass.
2
Press
Menu
,
2
,
2
,
6
.
3
Press
or
to
choose
On
(or Off).
Press
Set
.
4
Press
1
if you want to choose more
settings and the LCD will return to the Setup Send menu.
—OR—
Press
2
if you have finished choosing settings, and go to step 5.
5
Press
Start
. The MFC starts scanning the document.
6
If you place the original in the ADF, wait for the fax to be polled.
—OR—
If you are using the scanner glass, go to Step 7.
7
To send a single page, press
2
(or press
Start
again), wait for
the fax to be polled.
—OR—
To send more than one page, press
1
and go to Step 8.
8
Place the next page on the scanner glass.
Press
Set
.
The MFC starts scanning and returns to Step 7 (Repeat Step 7
and 8 for each additional page).
The document will be stored and can be retrieved from any other
fax machine until you delete the fax in memory by using the
Cancelling a Job function. (See Canceling a scheduled job on
page 6-11.)
22.Setup Send
6.Polled TX
▲
On
▼
Off
Select
▲▼
& Set