Brother MFC-8440 B - Manual (Page 88)

5 - 8 SETUP RECEIVE
Using a cordless external handset
If your cordless telephone is connected to the EXT. jack of the MFC
and you typically carry the cordless handset elsewhere, it is easier to
answer calls during the Ring Delay. If you let the MFC answer first,
you will have to go to the MFC so you can press
Hook to transfer the
call to the cordless handset.
Changing the remote codes
Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is
51 . The preset Telephone Answer
Code is # 51 .
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 4 .
3
Press or to select On (or
Off ).
Press Set .
4
If you want to, enter a new Fax
Receive Code.
Press
Set .
5
If you want to, enter a new Telephone Answer Code.
Press
Set .
6
Press Stop/Exit .
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code and
Telephone Answer Code to another three-digit code (such as
### and 999 ).
21.Setup Receive
4.Remote Code
▲ On
▼ Off
Select ▲▼ & Set