Brother 1810 - Manual (Page 61)

57
FONT FUNCTION
With the Font function, you can choose one of two fonts for your text.
The following font settings are available:
HELSINKI and BRUSSELS
The default font setting is HELSINKI. The currently selected font setting is always shown
by the Font indicators below the display.
Refer to
Reference at the end of this section for samples of the available settings.
To change the font setting:
1 While holding down , press once, and keep held down to dis-
play the current font setting.
2 While still holding down , continue pressing until the desired font set-
ting is displayed and is shown by the font indicator.
☞
The current font setting is also shown by the font indicator at the bottom left
of the display.
3 Release to apply the selected font setting to the entire text.
EXAMPLE
To select the BRUSSELS font setting:
1 While holding down ,
press once, and keep
held down.
2 While still holding down ,
continue pressing until
BRUSSELS is displayed.
3 Release .
Font
Font
H E L S I N K I
F O N T Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
Font
B R U S S E L S
F O N T Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2
Font