Additional information, Warning message, Replace the lamp – BenQ PE8700 User Manual

Page 24: Loosen the screws on the front lamp cover, Remove the front lamp cover, Loosen the three screws on the lamp shield, Take off the lamp shield, Loosen the two screws on the lamp module, Pull out the lamp module horizontally, Tighten the two screws on the lamp module

Advertising
Additional information, Warning message, Replace the lamp | Loosen the screws on the front lamp cover, Remove the front lamp cover, Loosen the three screws on the lamp shield, Take off the lamp shield, Loosen the two screws on the lamp module, Pull out the lamp module horizontally, Tighten the two screws on the lamp module | BenQ PE8700 User Manual | Page 24 / 27 Additional information, Warning message, Replace the lamp | Loosen the screws on the front lamp cover, Remove the front lamp cover, Loosen the three screws on the lamp shield, Take off the lamp shield, Loosen the two screws on the lamp module, Pull out the lamp module horizontally, Tighten the two screws on the lamp module | BenQ PE8700 User Manual | Page 24 / 27
Advertising
See also other documents in the category BenQ Projectors: