Brother NC6100H - Manual (Page 127)

11 - 12 TROUBLESHOOTING
3 If you have a large network, make sure that you have the Laser
Writer V8.xx or equivalent driver, since earlier versions may
cause PostScript errors. Also, verify that you get the correct
printer information when you select Printer Info from the Setup
button in the Chooser.
4 Make sure that you have selected the correct Printer Description File
(PPD) from the Chooser (otherwise PostScript errors may result).
5 Verify that you have selected the correct AppleTalk zone.
Because the print server gets its zone information from router
broadcasts, it may not be in the zone you expect, and will
therefore not show up in the Chooser. If this is the case, you may
need to force the zone name using BRAdmin, a web browser or
the
SET APPLETALK ZONE command from TELNET.
DLC/LLC Troubleshooting
If you are having trouble printing with DLC/LLC, check the following:
1 Make sure that the DLC/LLC protocol is enabled using either
BRAdmin, a web browser or TELNET.
2 Make sure that the MAC address of the Windows ® setting is the
same as shown in the printer settings page.
Web Browser Troubleshooting (TCP/IP)
1 If you can not connect to the print server using your web browser
it may be worth checking the Proxy Settings of your browser.
Look in the Exceptions setting and if necessary, type in the IP
address of the print server. This will stop your PC from trying to
connect to your ISP or proxy server every time you wish to look
at the printer server.
2 Make sure that you are using the proper Web Browser, we
recommend Netscape Navigator version 4.0 or later/ Microsoft
Internet Explorer version 4.0 or later.