Ibm as/400, Ibm as/400 -11 – Brother NC6100H User Manual
Page 23
1 - 11 UNIX PRINTING
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the
/etc/hosts
and
/etc/
printcap
files as described in step 2. Then run the sysadmsh
program as follows:
1
Select Printers.
2
Select Configure.
3
Select Add.
4
Enter the name of the print queue you entered in the
/etc/
printcap
file as the Printer name.
5
Enter anything as the Comment, and Class name.
6
For the Use printer interface select Existing.
7
Press the F3 key to get a list of available interfaces, and select
the desired one as the Name of interface using the cursor keys
(
Dumb
is a good choice).
8
Select Direct as the Connection.
9
Enter the desired Device name (
/dev/lp
generally works).
10
Select Hardwired as the Device.
11
Select No for the Require banner field.
Older SCO Unix Systems
The Brother print servers support the FTP protocol. Earlier SCO Unix
systems are often configured to print using the FTP protocol.
IBM AS/400
To use a Brother print server with an IBM AS/400 running IBM's TCP/
IP gateways services for OS/400 (the OS/400 system must be v3.1
or later)
Use the CFGTCP command at your OS/400 prompt to add the print
server's TCP/IP address to the AS/400 host table.