Brother NC6100H - Manual (Page 32)

TCP/IP PRINTING 2 - 6
Windows NT
®
4.0 Printing: Associating to the
Printer
You must now create a printer on your Windows ® system using the
standard Windows ® printer setup procedure.
1 To do this, go to the Start button, select Settings and then
Printers.
2 Double click the Add Printer icon to get the Add Printer
Wizard.
3 Select My Computer (not Network Printer) and click on Next.
4 Select the Brother LPR Port (the port name you assigned in step
6 of the “Installing Brother Peer to Peer Software” section in this
chapter) and click on Next.
5 Select the desired printer model. If the correct model is not
displayed, click on the Have Disk option and insert the CD-
ROM supplied with your printer.
6 If the driver already exists, select Keep Existing Driver (if it
does not exist, this step will be skipped), and then click on Next.
7 If desired, change the name of the printer then click Next.
8 If desired, make the printer shared (so other user can access it),
and select the operating system(s) that these other computers
will be running. Click on Next.
9 Select Yes when you asked Would you like to print a test
page?. Click on Finish to complete the installation. You may
now print to the printer as if it were a local printer.