Brother NC6100H - Manual (Page 96)

DLC PRINTING 8 - 1
8
8
DLC Printing
Printing from Windows NT
®
4.0 or
Windows
®
2000
Overview
DLC is a simple protocol that is included in Windows NT ® 4.0 and
Windows ® 2000 as standard. It can be used on other operating
systems (such as Windows ® 3.x) with the addition of vendor-supplied
software that supports the Hewlett-Packard JetDirect card.
Quick Tips:
1 One way to print the details of all network settings is to print a
settings page. Refer to the Quick Setup Guide for information on
how to print the settings page.
Configuring DLC on Windows ® NT4.0 and
Windows ® 2000
To use DLC on Windows NT ® 4.0, you must first install the DLC
protocol.
1 Log into Windows NT ® 4.0 with administrative privileges. Go to
the Windows NT ® 4.0 Control Panel and double click on the
Network icon. Windows ® 2000 users select the properties of
the Local Area Connection.
2 On Windows NT ® 4.0 systems, click on the Protocol tab, and
click Add. Windows ® 2000 users click the Install button from
the General tab.
Because DLC is a non-routable protocol, there cannot be a
router between the print server and the sending computer.