Warning, Caution, General – Philips Éveil Lumière User Manual

Page 7: Electromagnetic fields (emf), Preparing for use, Setting the clock

Advertising
background image

- Do not let water run into the appliance or spill water onto the appliance (Fig. 3).

Warning

- Check if the voltage indicated on the appliance corresponds to the local mains voltage before

you connect the appliance.

- The appliance is suitable for a mains voltage of 230V and a frequency of 50Hz.

- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by

Philips or similarly qualified persons in order to avoid a hazard.

- This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their

safety.

- Children should be supervised to ensure that they do not play with the appliance.

- This appliance is for indoor use only (Fig. 4).

caution

- Do not drop the appliance or expose it to heavy shocks.

- Place the appliance on a stable, level and non-slippery surface.

- Do not use the appliance at room temperatures lower than 10°C or higher than 35°C.

- Make sure the vents in the top and in the bottom of the appliance remain open during use.

- Never use the appliance if the lamp housing or top cover is damaged, broken or missing.

- Consult your doctor before you start using the appliance if you have suffered from or are

suffering from serious depression.

- Do not use this appliance as a means to reduce your hours of sleep. The purpose of this

appliance is to help you wake up more easily. It does not diminish your need for sleep.

- The appliance has no on/off switch. To disconnect the appliance from the mains, remove the

plug from the wall socket.

- This appliance is only intended for household use, including similar use for instance in hotels.

general

- This appliance allows you to choose the light intensity level you want to wake up to (see section

‘Using the lamp’, chapter ‘Using the appliance’).

- If you often wake up too early or with a headache, reduce the light level.

- If you share a bedroom with someone else, this person may unintentionally wake up from the

light of the appliance, even though this person is further removed from the appliance. This

phenomenon is the result of differences in light sensitivity between people.
Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientific evidence available today.

preparing for use

1

Place the Wake-up Light 40-50cm from your head, for example on a bedside table.

2

Put the plug in the wall socket.

, The hour indication on the display starts flashing to indicate that you have to set the clock

time (Fig. 5).
setting the clock

1

Move the middle function selector (SET) up or down to select the hour.

Note: You can only do this when you are in the set clock menu and when the hour indication flashes. If

this is not the case, press the middle function selector (SET) two times. You are now in the set clock

menu.

EnglisH

7

Advertising
This manual is related to the following products: