Philips Balance de cuisine - Manual (Page 8)

This button change the weight displayed from grams (g) to ounces (oz)
or from ounces (oz) to grams (g).
Weighing on the weighing plate
1 Place the ingredient or ingredients to be weighed directly on the
weighing plate. (Fig. 10)
The weight is displayed immediately.
Weighing in a bowl
1 Put the empty bowl on the weighing plate. (Fig. 11)
The display shows the weight of the bowl.
 Press the reset button 3. (Fig. 1)
The display reads 0 again.
 If you remove the bowl from the weighing plate, the display shows
the negative weight of the bowl (Fig. 1).
4 Put the ingredient to be weighed in the bowl. (Fig. 14)
The display shows the weight of the ingredient only.
The appliance shows the weight of the ingredients only (without
the weight of the bowl) until you reset the appliance by pressing
the reset button 3 while the weighing plate is empty. (Fig. 15)
Each time you press the reset button 3 when there is something
on the weighing plate, the weight on the display is set back to 0
again, irrespective of the ingredients that are already in the bowl on
the weighing plate. For example: if you have put 00 grams of sugar
in the bowl on the scales and you press the 3 button, the weight
is set back to 0. You can then easily add another ingredient, for
example 300 grams of flour, without calculating. (Fig. 16)
Features
Automatic switch-off
If you do not use the appliance for 3 minutes when it is switched on, it
switches off automatically to save battery power.
,
,
,
,
,
,
EnglisH 8