Philips Brosse multi-styles - Manual (Page 12)

 Slide the styler gently down the length of the hair in a few seconds.
When the plates are -5cm above the end of the lock, slightly twist
the appliance inwards or outwards to create the desired type of
flick.
sleek look
1 Press the lever to open the straightening attachment.
 Remove the straightening plates one by one. Grab the cool tip and
pull each plate out of the straightening attachment (Fig. 11).
 Turn the plates round and slide them back into the attachment with
the flat sides pointing towards each other (Fig. 12).
You can now use the straightening attachment to create sleek hair
without flicks.
Make sure that the edges of the plates are inserted properly into the
grooves.
 Take a lock of hair (max. 5 to 6cm wide). Press the lever to open
the straightening attachment and place the lock between the plates.
5 Slide the styler gently down the length of the hair in a few seconds.
6 Let the sleek hair cool down before you comb or brush it.
cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1 Unplug the appliance.
 Place the styler on the support of the attachment in a safe place
and let it cool down.
 Clean the appliance and the attachments with a small brush or a
dry cloth.
storage
1 Unplug the appliance.
EnglisH 1