Philips Brosse multi-styles - Manual (Page 8)

The attachments have a ceramic coating. This coating slowly wears
away over time. This does not affect the performance of the
appliance.
Do not leave attachments in your hair for more than a few seconds
at a time, to prevent damage to your hair.
Only use the appliance on dry hair.
Do not use the appliance on artificial hair.
Do not use the appliance for any other purpose than described in
this manual.
Wait until the appliance has cooled down before you store it.
Do not wind the mains cord round the appliance.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Preparing for use
connecting/disconnecting attachments
This procedure applies to all attachments.
1 Slide the attachment onto the handle. Make sure that the support
points downwards (Fig. ).
 Turn the locking ring on the handle to the right until the bold
arrow on the locking ring is in line with the arrow on the
handle (Fig. ).
The attachment is now securely fixed to the handle.
 To disconnect attachments, turn the locking ring to the left and pull
the attachment off the handle.
Unplug the appliance when you remove an attachment after or during
styling. Do not touch the metal and ceramic parts of the attachment, as
they are hot.
-
-
-
-
-
-
-
EnglisH 8