Philips 46PFL5605H-12 - Manual (Page 18)

EN 18
 [Add your devices]: Adds new devices
to the home menu. Note that you must
add a new device to the home menu,
in order to access it.
 [Setup]: Accesses menus that allow you
to change picture, sound and other TV
settings.
Browse
NonPu blish
The browse menu gives you easy access to:
 Electronic program guide
 TV channel list
 Teletext
To access the browse menu, while watching
TV, press
.
1. Press the Navigation buttons to select an
item:
 [Programme guide]: Accesses the
Electronic Program Guide.
 [Channel list]: Accesses the TV channel
list.
 [Text]: Accesses teletext.
2. Press OK to confirm your choice.
Experience
Press to access the experience menu,
which provides a range of frequently-used
settings.
The experience bar menu gives you easy
access to:
 [Picture format]: Changes the picture
format.
 [Smart picture]: Frequently-used
picture settings.
 [Smart sound]: Frequently-used sound
settings.
 [Speakers]: Configure TV speakers for
Philips EasyLink.
 [Picture shift]: Adjusts the position of
the picture.
Channel list
NonPu blish
The channel list displays the TV channels and
possible radio stations installed on your TV.
1. While watching TV, press
.
2. Select [Channel list], then press OK.
3. Select a channel, then press OK to access
the channel.
4. Press to exit the channel list without
changing the channel.
Add your devices
NonPu blish
After you connect a device to the TV, add
this device in the home menu for easy
access.
In the home menu, select [Add your
devices], then press OK. Follow the
instructions on-screen to add the device to
the home menu.
To remove a device from the home menu,
select the item, press and select
[Remove this device]. Press OK.
Setup
NonPu blish
[Setup] in the home menu allows you to
change most of the TV settings, including:
 Picture or sound settings
 Installation or update of TV channels
 Update of TV software
 Other special features
1. In the home menu, select [Setup], then
press OK.
2. Select an item with the Navigation
buttons, then press OK: