Philips 46PFL5605H-12 - Manual (Page 20)

EN 20
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an
extended period of time, switch off the TV
using the power switch on the bottom of
the set.
Switch channels
NonPu blish  Press on the remote control or
P/CH +/- on the side of the TV.
 Press , then select [Channel list] to
use the channel list.
 Press to return to the
previously-viewed channel.
 Enter a channel number using the
Numeric buttons.
To view analog or digital channels only
Filter the channel list to access analog or
digital channels only.
1. In the channel list, press .
2. Select [Select list] > [Analogue] or
[Digital], then press OK.
Depending on your selection, only digital or
analog channels become available.
Adjust volume
NonPu blish
To increase or decrease volume
 Press +/- on the remote control.
 Press +/- on the side of the TV.
NonPu blish
To mute or unmute sound
 Press to mute the sound.
 Press again to restore the sound.
Use the [Sound] menu to adjust headphone
volume. For more information, see Setup
the TV > Change picture and sound
settings > More sound settings (Page 31).
Use Smart picture settings
NonPu blish
Use the [Smart picture] experience menu
to access frequently-used picture settings.
1. While watching TV, press
.
2. Select [Smart picture], then select one of
the following settings:
 [Personal]: Sets the TV to your
personal preferences set in the
[Picture] menus in [Setup].
 [Vivid]: Rich and dynamic settings, ideal
for daylight use.
 [Natural]: A natural picture setting.
 [Cinema]: Ideal settings for watching
movies.
 [Game]: Ideal settings for gaming.
 [Energy saving]: The most energy
conscious settings.
 [Standard]: Adjusts picture settings to
suit most environments and types of
video. Factory default settings.
 [Photo]: Ideal settings for viewing
photos.