Philips NP2900-37B - Manual (Page 34)

33
Information
This is how you can find information about
NP2900:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Device ID and information].
3
Press OK to confirm.
The device information is shown on »
the display of NP2900.
Press
» BACK to go back to the
previous screen.
Press
» HOME to go to the Home
menu.
Demo mode
You can access the demo mode in the Settings
menu:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Demo mode].
The demo plays continuously until you »
exit the demo play.
3
To exit the demo play, press .
Tip
You can start the demo play more quickly with •
the DEMO button on the remote control.
Check for SW upgrades
This is how to navigate and select with the
remote control:
Press • or to select a menu option.
Press • to confirm a selection.
Press • OK to confirm an
alphanumeric entry.
Press • HOME to go to the Home menu.
This is how you can check for software
updates for NP2900:
1
Ensure that NP2900 is connected to the
Internet.
2
Press SETTINGS, to go to the Settings
menu.
3
Select [Check for software upgrades]
and confirm.
NP2900 checks for a new software »
version.
4
Read the information shown in the display
of NP2900.
New software is available for NP2900:
1
Follow the instructions shown in the
display to complete the update.
NP2900 prompts you to accept »
the conditions and download of the
software.
NP2900 restarts after the update.
»
Note
Mandatory updates do not require your •
acceptance or confirmation.
NP2900 already has the latest software installed:
Press • BACK to go back to the
previous screen.
Press • HOME to go to the Home
menu.
English
EN