Philips 8FF3FPB-27B - Manual (Page 27)


Settings
ENGLISH
3 • Navigate Right to select On/Off Dim.
• Navigate Up or Down to select either
On or Off.
• Press Play/OK to apply the settings.
Press the Mode button to leave this menu
and play the slideshow.
Press the Play/OK to go to Slideshow,
Browse or Clock mode.
Note 1:
Digital PhotoFrame will automatically turn off its
display exactly at the Auto-Dim-Start time; if
the time has already passed it will go into Auto-
Dim-End status at the next set time.
Note 2:
If you want to turn ON the PhotoFrame during
an auto OFF period, just press any key, the
PhotoFrame will wake up until the next auto
OFF period.
6.10 Check the Status of your
Photoframe
You may check the status of your PhotoFrame-
how many more photos can be stored, which
media are currently connected, and the
PhotoFrame software version.
1 • Press the Mode button to access the
Main Menu.
• Navigate Down to highlight Settings and
press Play/OK.
2 • Navigate Down to go to Status.
• The status of the PhotoFrame is shown in
the right window.
• If you have a memory card in the
PhotoFrame it will give you the status of
the card (card type and free memory left).
Firmware: (PhotoFrame software version)
Connected media: (Lists all memory cards
connected to PhotoFrame)
Connected media free space: (remaining
free memory in MB)