3 get started, Charge the headset, Pair the headset with your mobile phone – Philips SHB7000-00 User Manual

Page 8: Pair the headset with your mobile phone 6

Advertising
background image

6

EN

3 Get started

Charge the headset

Warning

Before you use your headset for the first time, charge

the battery for four hours for optimum battery capacity

and lifetime.

Use only the original USB charging cable to avoid any

damage.

End a call before charging the headset, as connecting

the headset for charging will power off the unit.

Plug the headset into a powered USB port with

an USB charging cable.

»

LED turns white during charging and

turns off when the headset is fully

charged.

Tip

Normally, a full charge takes three hours.

Pair the headset with your

mobile phone

Before you use the headset with your mobile

phone for the first time, pair it with the mobile

phone. A successful pairing establishes a unique

encrypted link between the headset and the

mobile phone. The headset stores the last eight

links in the memory. If you try to pair more than

eight devices, the link for the earliest paired

devices is replaced by the new link.

1

Make sure that the mobile phone is turned

on and its Bluetooth feature is activated.

2

Make sure that the headset is charged and

turned off.

3

Press and hold

until the LED starts

flashing white and blue alternately.

»

The headset is in pairing mode, which

lasts five minutes.

4

Pair the headset with the mobile phone.

For details, refer to the user manual of

your mobile phone.

A sample pairing is shown below.

1

Activate the Bluetooth feature of your

mobile phone, search for the model

number of the headset.

2

On mobile phones featuring Bluetooth

2.1+EDR or higher, you do not need to

enter a pass code.

3

From the found devices, select Philips

SHB7000.
• Enter "0000" (4 zeros) if prompted to

enter the pin code of the headset.

Settings

Select

Back

Connectivity

10:37

Enter Password

****

0000

Settings

Bluetooth

Select

Back

Connectivity

10:35

Add

Bluetooth

device

Settings

Devices Found

Select

Back

10:36

Philips SHB6000

Settings

Select

Back

Connectivity

10:37

Enter Password

****

0000

Settings

Bluetooth

Select

Back

Connectivity

10:35

Add

Bluetooth

device

Settings

Devices Found

Select

Back

10:36

Philips SHB7000

Advertising
This manual is related to the following products: