Philips SHB7000-00 - Manual (Page 9)

7
English
EN
4 Use the headset
Connect the headset to a
mobile phone
1
Turn on your mobile phone.
2
Press and hold to turn the headset on.
» The blue LED flashes.
» The headset is reconnected to the last
connected device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone or its Bluetooth
feature after turning on the headset, connect the
headset from the Bluetooth menu on your mobile
phone.
Automatic power saving
If the headset fails to connect any Bluetooth
device within range in five minutes, it powers
down automatically to save the battery life.
Use your headset
Task Operation Sound or LED
Indicator
Turn the
headset on.
Press and
hold for
more than 1
second
1 short beep
• 1 blue flash:
Battery level
> 50%
• 1 white flash:
Battery level
< 50%
Turn the
headset off.
Press and
hold for
more than 4
seconds
• 1 long beep
• 1 long white
flash
Play or pause
music.
Press 1 short beep
Pick up or
terminate a
call.
Press 1 short beep
Reject a call. Press and
hold
1 short beep
Redial the last
number.
Press
twice
1 short beep
Switch caller in
a call.
Press
twice
1 long beep
Adjust volume. Slide up and
down +/-
1 short beep
Skip forward. Press 1 short beep
Skip backward. Press
twice
1 short beep
Mute/unmute
the mic while
in a call
Press
twice
1 short beep
Other status and indicators
Headset status Indicator
The headset is connected
to a Bluetooth device, while
the headset is in standby
mode or while you are
listening to music.
Blue LED
flashes every 6
seconds.
The headset is ready for
pairing.
LED flashes
whiteand
bluealternately.
The headset is on but not
connected to a Bluetooth
device.
Blue LED
flashes fast.
There is an incoming call. Blue LED
flashes twice
per second.
Low battery. White LED
flashes.
Battery is fully charged. White LED is
off.