Dvd player or other accessor – Philips widescreen flat TV 50PF9956 127 cm 50" plasma Progressive Scan User Manual
Page 22
18
Notes
- The labels for the component video sockets may differ depending on the DVD player or the device connected.
Although the abbreviations may vary, the letters B and R stand for the blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 720p (not with 42PF9956), 1080i
and 1152i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which may
cause difficulties for the television to properly display.
Warning
: in case you notice scrolling images, wrong colors or no colour, no picture, or even combinations of
these on your screen, check if the connections are done in the correct way or move your digital device further
away from your TV.
AV1
AV2
R
L
V
H
S-VIDEO
S-VIDEO
Y/G
CVBS
Pr/R
Pb/B
R
L
Pr
Pb
Y
1
2
DVD / Cable Box
3
Devices with Component Video Output Connectors
(YPbPr)
&
Connect the three separate component video cables 1
to the device having component video outputs (YPbPr),
such as DVD-players, laser-disc players, videogame
players, satellite receivers or other equipment, and to
the
Y
,
Pb
and
Pr
jacks of
AV1
or
AV2
on the TV.
é
Connect the audio cable to device’s
AUDIO L
and
R
2 jacks and to the
L
an
R
audio
YPbPr
jacks of
AV1
or
AV2
.
Devices with RGB output
&
Connect the device with RGB output with separate
Horizontal and Vertical sync to the
Pr
/
R
Pb
/
B Y/G
input
jacks and to the
H
and
V
jacks of
AV2
3.
é
Connect the audio cables to the
L
and
R AUDIO
jacks
of
AV2
.
Devices with an S-Video connector
&
Connect an S-Video cable to the
AV1
or
AV2 S-VIDEO
input.
Note: When using the
S-VIDEO
connector do not connect
any device to the
AV2 CVBS
input.
é
Connect the audio cables to the device’s
AUDIO L
and
R
jacks and to the
L
and
R
audio
AV1
or
AV2
jacks on
the TV.
DVD Player or other accessory digital source devices