Philips widescreen flat TV 50PF9956 127 cm 50" plasma Progressive Scan - Manual (Page 6)

2
Do not insert the power plug in a wall socket
before all connections are made.
& Wall mounting instructions/Table stand
For the wall mounting instructions follow the
illustrated steps printed on the separate
template. Make sure that the wall mount is
being fixed securely enough so that it meets
safety standards.
The weight of the TV (excl. packaging) is about
77 Lbs (42PF9956); 127 Lbs (50PF9956).
How to mount the supplied stand, see the
separate leaflet.
Note: other (not supplied) stands are optional
accessories. Consult your dealer.
é Place or hang the TV wherever you want, but
make sure that air can circulate freely through
the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar
unit.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity. Avoid heat,
direct sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on it.
“ Insert the aerial plug firmly into the aerial
socket x at the bottom of the TV.
‘ To connect other accessory devices, see p. 16.
In order to obtain the best result, please use
only the supplied aerial cables between the TV
and recorder, and between recorder and aerial
connector.
( Insert the power plug supplied into the mains
at the bottom of the TV and in the wall socket.
Refer to the back of the TV set for the correct
operation voltage. Consult your local dealer if
your AC power supply is different.To prevent
damaging the power (AC) cord which could
cause a fire or electric shock, do not place the
TV on the cord.
§ Remote control : Insert the 2 batteries
supplied (Type R6-1,5V).
The batteries supplied
do not contain the heavy
metals mercury and
cadmium. Please check
on how to dispose of
exhausted batteries
according to local
regulations.
è Turn the TV on : Press the power button B
at the right side of the TV.
A blue LED and the screen light on.
The blue LED blinks every time you press a button
on the remote control. When you turn on your set
for the first time, the menu language automatically
appears on the screen. Alternately the explanation
appears in different languages.
Should your remote be lost or broken you can still
change some of the basic settings with the buttons
on the right side of your TV.
Press:
• the
+ V - button to adjust the volume;
• the + P/CH - button to select the TV channels or
sources.
Press the MENU button to summon the main menu
without the remote control.
Use:
• the
+ V - button and the + P/CH - button to
select menu items in the directions as shown;
• the MENU button to confirm your selection.
Note: When activated via the MENU button on the right
side of the TV, only Exit lets you remove the menu.
Navigate to Exit and press the MENU button.
TV
Settings
Demo
Install
Exit
Picture Sound Features
MENU P/CH V B
Buttons on the right side of the TV
Preparation