4 get started, Supplied accessories, Mounting stand onto tv for 40” and 46 – Philips 55PFL5705D-F7 User Manual

Page 9: Positioning the tv, Adjusting the swivel angle, Installing the remote control batteries, Installing the remote control batteries 1

Advertising
background image

8

Positioning the TV

Warning

•

Do not insert the AC power cord into the power socket outlet before all the
connections are made.

•

Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

•

Before you move the TV, disconnect attached cables to prevent damage to connectors.

In addition to reading and understanding safety instructions, consider

the following before positioning your TV :
• Ensure that you always have easy access to the AC power cord or

plug to disconnect the TV from the power.

• If the TV is mounted on a swivel base, ensure that no strain is

placed on the AC power cord when the TV is swiveled. Strain on

the AC power cord can loosen connections.

• The ideal viewing distance for watching TV is three times its screen size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.

Using a Kensington lock

There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.

AC IN

Adjusting the swivel angle

You can adjust the viewing angle of your TV.

Top of the unit

approx.

approx.

15°

15°

approx.

approx.

15°

15°

approx.

approx.

15°

15°

approx.

approx.

15°

15°

Caution

•

While adjusting the swivel angle of your TV, hold the base fi rmly to prevent the TV from
tipping over and falling down.

Installing the remote control batteries

1

Slide the battery cover off the back of the remote control.

2

Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −

ends of the batteries line up with the markings inside the case.

3

Slide the cover back into position.

Note

•

Remove the batteries if not using the remote control for an extended period of time.

4 Get started

Supplied accessories

• Remote

Control

• 2 x AAA, 1.5V Batteries
• M5 x 20 double sems screw x 4 (available for 40” and 46” only)
• AC Power cord
• Cable management tie
• USB wireless LAN adapter (PH2010A)
• User

Manual

• Quick Start Guide
• Box-inserts

Note

Wireless LAN Adapter for Philips models : 55PFL5 705D, 46PFL5 705D, 40PFL5 705D

•

This wireless device can only be used with a limited number of Philips products. For
more details go to: www.philips.com/welcome and enter your model number.

•

Do not use the supplied USB wireless LAN adapter with devices other than this unit
and a limited number of Philips products.

•

The supplied USB wireless LAN adapter is guaranteed by manufacturer.

Mounting stand onto TV for 40” and 46”

Applicable to TVs without mounted stands.

1

x 4

2

Note

•

To wall mount the TV, refer to the addendum.

•

If you lose the stand mounting screws, please purchase 4 Phillips head screws (M5×20 )
at your local store.

EN

Advertising