3 connect the fm antenna and power cord, 4 power on and select a source, 5 set the clock – Philips Original radio ORD7100R with 30-pin connector for iPod-iPhone FM 10W User Manual
Page 9
7
EN
4 Power on and
select a source
To power on the product,
• press the knob,
• turn the SOURCE knob on the product, or
• press on the remote control.
»
The product switches to the last
selected source.
• To switch the product to standby
mode, press the knob or again.
To select a source,
• turn the SOURCE knob on the product, or
• press the SRC button on the remote
control repeatedly.
• FM radio: is highlighted, and the
frequency of the current FM radio
station is displayed.
• iPod/iPhone: is highlighted, and
scrolls.
• External device: is highlighted, and
is displayed.
5 Set the clock
1
In standby mode, press and hold the
knob for two seconds.
»
is displayed with 24 blinking.
2
Turn the
knob to select a time format,
and then press the
knob to confirm.
•
: 24-hour time format
•
: 12-hour time format
»
The hour digits blink.
3
Turn the
knob to set the hour, and
then press the
knob to confirm.
»
The minute digits blink.
4
Turn the
knob to set the minute, and
then press the
knob to confirm.
»
The set time is displayed.
Tip
•
Once your iPod/iPhone is connected and recognized,
the clock on the product is synchronized with the iPod/
iPhone.