Philips 42PFL7675H-12 - Manual (Page 45)

EN 45
En
gl
is
h
5. If the Help file on the Philips Support site
is a later version than the file in your TV,
click it to save the file to the USB flash drive.
6. Using the archive utility, extract the *.zip
file to the 'upgrades' folder on the USB flash
drive.
7. The *.upg Help file is extracted.
8. Disconnect the USB flash drive from the
PC.
 Do not switch off the TV or remove
the USB flash drive during the update.
 If a power failure occurs during the
update, do not remove the USB flash
drive from the TV. The TV will continue
the update as soon as power is
restored.
 If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Connect the USB flash drive containing
the *.upg Help file to the USB connector on
the TV. Disconnect all other USB devices
from the TV.
3. Press .
4. Select [Setup] > [Software settings] >
[Local updates] .
The updates screen appears.
5. Select the '*.upg' Help file and press OK.
A message will display the update status.
Follow the on-screen instructions to
complete the update and restart your TV.
Reinstall the TV
Reinstalling your TV resets all picture and
sound settings, and reinstalls all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the on-screen instructions.