Philips 42PFL7675H-12 - Manual (Page 62)

EN 62
Use HDMI ARC
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital
audio to an HDMI Home Theatre System.
HDMI ARC allows you to use Philips
EasyLink to output TV audio directly to a
connected audio device, without the need
for an additional digital audio cable.
Be sure that the device is HDMI-CEC and
ARC compliant, and that the TV is
connected to the device using an HDMI
cable attached to HDMI ARC connectors.
Enable or disable HDMI ARC
Note: Enabling HDMI ARC automatically
adds the device to the home menu.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [HDMI 1 - ARC] > [On] or
[Off].
3. Press OK to activate.
Use a CAM
Insert and activate a CAM
NonPu blish
Caution: Be sure to follow the instructions
described below. Incorrect insertion of a
Conditional Access Module (CAM) may
damage both the CAM and your TV.
Notes:
 This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programmes with a
high level of copy protection.
 Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
and insert the CAM into the Common
Interface at the side of the TV.
3. Push the CAM in as far as it will go and
wait for the CAM to be activated. This may
take several minutes. Do not remove the
CAM from the slot when in use as digital
services will be deactivated.
Access CAM services
NonPu blish
1. After inserting and activating the CAM,
press .
2. Select [Common interface], then press
OK.
3. Select the CAM provider and press OK.
Watching a CAM service
If a CAM is inserted and subscription fees
are paid, the TV shows the programme from
the digital TV service provider. The
applications, functions, content and
on-screen messages vary by CAM service.