Philips 32PFL4909-F7 - Manual (Page 18)

Connecting the TV to the Internet using a Wireless LAN
WLAN
LAN
Network provisioning
equipment
Ethernet cable
Broadband router Broadband router Broadband router
Internet
Note(s)
● After you make the wireless connection, set up the necessary network settings.
Network L p. 40
● Use a Wireless LAN Access Point (AP) (e.g. Broadband wireless router) which supports
IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
● This unit does not support Ad-hoc mode.
● Other radio devices or obstacles may cause interference to the wireless network
connection.
Digital Audio Output Connection
If you connect this Unit to an External Digital Audio Device, you can enjoy
multi-channel Audio like 5.1ch Digital Broadcasting sound.
Use a Digital Audio Coaxial Cable to connect the Unit to External Digital
Audio Devices.
Digital Home
Theater Amplifier
OUT OUT OUT
Digital Audio Coaxial cable Digital Audio Coaxial cable Digital Audio Coaxial cable IN IN IN
PC Connection
HDMI Connection
This Unit can be connected to your PC that has an HDMI terminal.
Use an HDMI cable for this Digital Connection.
PC
OUT
HDMI cable
IN
HDMI-DVI Connection
This Unit can be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Digital Connection
and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio
signal as well.
PC
OUT
HDMI-DVI
conversion cable
IN
OUT
Stereo Mini 3.5 mm Plug Audio cable
IN
VGA Connection
This unit is equipped with a PC Input jack. If you connect this Unit to your
PC, you can use this Unit as a PC monitor.
Use a VGA cable for this Video Connection and it requires a Stereo mini
3.5mm Plug Audio Cable for Analog Audio signal as well.
PC
OUT
VGA cable VGA cable VGA cable
IN
IN
Stereo Mini 3.5 mm Plug Audio cable Stereo Mini 3.5 mm Plug Audio cable Stereo Mini 3.5 mm Plug Audio cable
18 .
English
Continued on next page.