Philips SA4RGA04KF-37 - Manual (Page 10)

8 EN
3 Get started
Charge power
RAGA has a built-in battery that can be
charged through the USB socket of a computer.
Connect RAGA to a PC by using the USB
cable.
Note
• When you connect RAGA to a computer, you are
briefly prompted to select: [Charge & transfer] or
[Charge & play].
• RAGA automatically applies [Charge & transfer], if no
new selection is made.
Battery level indication
• When the battery is low, the low
battery screen is displayed repeatedly.
• When the charging process is
complete, is displayed.
Note
• Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
To conserve battery power and increase the
play time, do the following on RAGA:
• Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).
Charge through a USB AC/DC
adapter
To charge RAGA through a USB AC/DC
adapter (not supplied), make sure that the
power output is 5.0 V and 0.5A.
Switch the player on or off
Press and hold until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 5 minutes in idle mode (no play, no
button is pressed), the player switches off.