Philips 27PT9007D-17 - Manual (Page 11)

HOW TO USE THE SIGNAL TYPE CONTROL
Follow these steps for Digital Mode and Analog Mode.
Press MENU button on the remote control to
display onscreen menu.
Press CURSOR or to scroll through the
onscreen menu until you see Setup highlighted.
Press CURSOR or to display the S
ETUP menu
features.
Press CURSOR or to scroll through the
setup features until you see Auto Channel S
earch
highlighted.
Press CURSOR or to display the AUTO
CHANNEL SEARCH menu features. Use CURSOR
or to highlight Signal Type.
Press CURSOR or to toggle between Antenna
and Cable.
he SIGNAL TYPE control lets you change the TV input sign
al to ANTENNA or CABLE mode. It is important
that you know which type of signal to look for (Cable or Antenna).
T
When finished, press CLEAR button to clear the
menu from the TV screen.
H
ELPFUL
H
INTS
When Cable is selected, channels 1 to 135 are available
in Digital Mode and channels 1 to 125 are available in
Analog Mode.
When Antenna is selected, channels 2 to 69 are
available for both Digital and Analog Modes.
When you are in Digital Mode, channel numbers will be
displayed as 1-2, or 1-3 etc.
Whether you
selected either Cable or Antenna mode,
both Digital and Analog channels will be installed.
11
MAIN MENU
AUTO CHANNEL SEARCH
Exit
Sound
Picture
Setup
Parental Control
Time
SETUP
Go Back
Auto Ch. Search
Channel Edit & Name
Closed Caption
Favorite List
Language English...
Format 4:3
Go Back
Signal Type Antenna
Analog Channel 69
Search percent 83
Digital Channel 4
Start
MENU
CLEAR