Philips 27PT9007D-17 - Manual (Page 5)

5
A GUIDE TO DIGITAL TV
What is Digital Television (DTV)?
Digital Television (DTV) is a relatively new type of broadca sting that promises to transform television viewing into a whole
new experience. Digital technology is used to capture images and sound to deliver a better picture quality.
There are many levels of digital television quality. The most common are:
Standard Definition TV (SDTV)
SDTV is the basic level of quality display and resolution for both analog and digital.
Transmission of SDTV can be in the
traditional (4:3) or widescreen (16:9) format.
Enhanced Definition TV (EDTV)
EDTV is better in picture quality than analog television.
The formats for EDTV are 480p widescreen (16:9) or traditional
(4:3). EDTV is in the middle range quality between SDTV and HDTV.
High Definition TV (HDTV)
HDTV has the highest quality for digital broadcast formats. Its resolution is widescreen format (16:9). Combined with
digitally enhanced sound technology, HDTV sets new standards for sound and picture quality in television.
Difference between Digital and Analog?
Digital T elevision is a more flexible and efficient technology than the analog broadcast system. Analog broadcasts can only
provide one program at a time. Digital television can broadc ast a high definition program or more than one standard definition
program at the same time. With Digital television you can receive information of programs through the Information Banner.
This information is provided by the broadcaster.
QUICK TIPS BEFORE YOU START
Accessories List:
1 Remote Control
2 AA batteries
1 User Manual
1 Warranty card
Pressing the Ana/Dig button on the remote control toggles the TV between Digital and Analog Mode
.
When the TV is powered on for the first time you will be prompted to auto install the TV in order to receive the channels
that are broadcasted locally.
Auto installation may take 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider
or broadcaster.
When in Digital Mode an audio only (without video picture) signal is received from the broadcaster, AUDIO ONLY will
appear on the TV screen.
,, ,,
When the TV is not receiving any signal from the antenna / cable,
NO SIGNAL will appear on the TV screen. This can be
caused by the antenna /cable not being plugged in correctly or when the wrong tuner mode is selected.
When no transmission is received from the broadcaster, NO PROGRAM will appear on the TV screen.
You will not be able to receive pay ch
annels when using direct antenna/ cable connection to the television.
When the set-top box is connected to the television using coaxial cable, it is necessary to auto-program the television for
the signal channel (3 or 4) that the set-top box outputs and change the channels at the set-top box to view the program.
When the set-top box is connected to the television using AV connection, select the televi
sion input source for the
set-top box to view the program and change the channels at the set-top box to view the program.
1
2
3
4
5
6
7