Philips 40PFL5706-F7 - Manual (Page 14)

13
English
Français
Español
1
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2
Use the remote control of your set-top box to select channels.
Watching connected devices
To watch connected devices
1
Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV screen.
2
Use the remote control of the device to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2
Use the remote control of the device to select channels.
Automatic Power Shut Off
If there is no input signal and no operation for 15 minutes, the unit will
turn off automatically.
Watching a Blu-ray disc
To watch a Blu-ray Disc
1
Insert a Blu-ray Disc into your player.
2
Press ►(play) on the remote control of the Blu-ray Disc player.
» The Blu-ray Disc might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2
Use the remote control of the Blu-ray Disc player to play the disc.
Adjusting volume
To increase or decrease volume
• Press
VOL + / − on the remote control or press VOLUME + / − on
the side of the TV.
To mute or unmute sound
• Press
MUTE on the remote control to mute the sound.
• Press MUTE again or VOL + / − to recover the original sound.
Watching channels from a set-top box
To watch channels from a set-top box
1
Switch on the set-top box.
» The picture from your set-top box might appear automatically
on the TV screen.
2
Use the remote control of your set-top box to select channels.
If the picture does not appear
EN