Philips 46PFL3706-F7 - Manual (Page 15)

14 EN
Watching a Blu-ray disc
To watch a Blu-ray Disc
1
Insert a Blu-ray Disc into your player.
2
Press ► (play) on the remote control of the Blu-ray Disc player.
» The Blu-ray Disc might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2
Use the remote control of the Blu-ray Disc player to play the disc.
Switching audio mode
This section describes how to switch audio language in digital mode and
how to switch audio in analog mode.
DTV
1
Press SAP to display the currently selected language and the
number of available languages.
11.1
English 1/3
11.1
English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
• SAP does not control external audio devices.
• The information display will automatically disappear in a few seconds.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
11.1
English 1/3
11
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
SAP / STEREO
SAP / STEREO
SAP / MONO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
MONO / STEREO MONO / STEREO SAP / MONO SAP / MONO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio