Hydraulic oil, Hydraulic oil -13 – JLG G6-42P Operator Manual User Manual
Page 103
Advertising
Section 7 - Lubrication and Maintenance
7-13
31200148
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Be sure all cylinders are fully retracted and machine is level.
2. Perform “Shut-Down Procedure” on page 4-4.
3. Check level of hydraulic oil in tank at the sight gauge (6) on the hydraulic
tank (5). The oil level should be visible in the gauge window.
4. If hydraulic oil is low, open the tank cover and remove oil fill cap (7) from filler
neck. Add hydraulic fluid to bring oil up to the upper mark on the sight gauge.
5. Replace hydraulic oil fill cap.
6. Close and secure the tank cover.
10
OX0180
2-FRONT
6
7
5
Advertising