Park brake switch, Parking procedure, Park brake switch -9 – JLG G6-42P Operator Manual User Manual
Page 43: Parking procedure -9, Warning
Section 3 - Controls and Indicators
3-9
31200148
Park Brake Switch
Park brake switch controls the application and release of the park brake. Indicator
light illuminates to indicate brake is applied.
• With the engine running and the park brake switch in "OFF" position (1), park
brakes are disengaged.
• With switch in "ON" position (2), park brake is engaged and transmission will not
engage forward or reverse.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-4.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake switch to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake
or turning engine off while traveling will cause unit to stop abruptly and could
cause load loss. Either may be used in an emergency situation.
OY0122
R
N
F
1
2