JLG 534D-9 Operator Manual - Manual (Page 104)

Section 5 - Attachments
5-42 31200169
Personnel Work Platform (S/N 0160037689 & After)
Description P/N
Personnel Work Platform, ANSI................................ 1001103637
Personnel Work Platform, ANSI (French) ................. 1001103736
Personnel Work Platform, ISO.................................. 1001103730
Use Personnel Work Platform Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-3.
The operator and personnel in platform must read and understand the
separate personnel work platform manual prior to installing and using a
platform.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt lever (2) controls platform tilt.
• Move lever back to tilt up.
• Move lever forward to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
• Check to ensure the personnel platform is securely attached to the forks and/or
carriage.
OY1610
OX0770
2-FRONT 2-FRONT
2
1