Tipping hazards, Tipping hazards -7 – JLG 1200SJP Operator Manual User Manual

Page 21

Advertising
background image

SECTION 1 - SAFETY PRECAUTIONS

3121141

– JLG Lift –

1-7

• The minimum approach distance may be reduced if insulating

barriers are installed to prevent contact, and the barriers are
rated for the voltage of the line being guarded. These barriers
shall not be part of (or attached to) the machine. The mini-
mum approach distance shall be reduced to a distance within
the designed working dimensions of the insulating barrier.
This determination shall be made by a qualified person in
accordance with the employer, local, or governmental require-
ments for work practices near energized equipment

DO NOT MANEUVER MACHINE OR PERSONNEL INSIDE PROHIBITED ZONE (MAD).
ASSUME ALL ELECTRICAL PARTS AND WIRING ARE ENERGIZED UNLESS KNOWN OTH-
ERWISE.

Tipping Hazards

• The user must be familiar with the surface before driving. Do

not exceed the allowable sideslope and grade while driving.

• Do not elevate platform or drive with platform elevated while

on or near a sloping, uneven, or soft surface. Ensure machine is
positioned on a firm, level and smooth surface before elevat-
ing platform or driving with the platform in the elevated posi-
tion.

• Before driving on floors, bridges, trucks, and other surfaces,

check allowable capacity of the surfaces.

Advertising
This manual is related to the following products: