JLG 4017 Platform Operator Manual - Manual (Page 33)

Section 3 - Operation
3-1 31200029
SECTION 3 - OPERATION
3.1 WARM-UP AND OPERATIONAL CHECKS
This section outlines the checks to be performed at the beginning of each work shift
or at each change of operator.
Warm-up and operational checks of the telehandler are to be completed before
entering the platform. Refer to the Operator & Safety Manual supplied with
telehandler.
After start-up from platform and engine warms, check:
1. Horn must be audible with engine running.
2. All boom and platform functions - operate smoothly and correctly.
3. Perform any additional checks described in Section 7.