JLG G6-42A Operator Manual - Manual (Page 91)

Section 5 - Attachments
5-15 31200744
Carriage with Forks
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
Suspend loads in accordance with requirements set forth in
Section 1 - General Safety Practices.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt roller switch (2) controls fork tilt.
• Press roller switch down to tilt up.
• Press roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-9.
Operation:
• When utilizing lifting lug, weight of rigging must be included as part of total
load lifted
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
OY0690
OY3320
1
2