Noise emission level, Telehandler vibration, Platform vibration – JLG 4017 Eccupped for Platform Operator Manual User Manual
Page 129: Noise emission level -5 telehandler vibration -5
Section 8 - Specifications
8-5
31200028
Noise Emission Level
• The telehandler is approved under the applicable EC directives.
• The LWA sound power level is shown on the machine.
• To avoid any increase in noise emission, after maintenance and repair work, all
panels and other sound absorbing materials must be replaced in their original
condition. Do not modify the machine in such a manner as to increase noise
emissions.
Telehandler Vibration
When the telehandler is used in the manner intended the vibration load values
measured at the operator’s seat are less than or equal to the test vibration values for
the corresponding class of machinery per ISO 7096. The “azw” vibration
acceleration values measured according to prEN 13059, therefore meet the
requirements for whole body vibration protection in EN 474-1.